Setting Up Your VPN

Step 1: Order a plan

Choose a speed-based or bandwidth-based VPN plan from the VPN Hosting category, based on how you plan to use it.

Step 2: Open your VPN panel

From your service page, click Manage VPN. This shows your connection status, a QR code, and a config download link.

Step 3: Connect

• Phone (iOS/Android): install the WireGuard app, tap + → Scan from QR code, scan the code shown in your panel.
• Desktop (Windows/macOS/Linux): install the WireGuard app, download your config file from the panel, then Import tunnel(s) from file in the app.

Step 4: Verify it's working

Once connected, check your public IP (e.g. via a "what's my IP" site) — it should show our server's address, not your own ISP's.

Managing your VPN

Your panel has three controls:

• Disable VPN — immediately disconnects and blocks that device's access until re-enabled.
• Enable VPN — restores access.
• Recreate (new key) — generates a brand new key pair. Your old config and QR code stop working the moment you do this, on every device that was using them — only use this if you actually need a fresh key (e.g. a leaked config).

Usage and speed limits

If your plan has a bandwidth cap, your current cycle usage is shown on the panel, and resets automatically each month. If your plan has a speed cap, it's enforced automatically — no action needed on your end.